sf6 Circuit Breaker

This is one of the best circuit breaker amongst different Circuit Breaker Types , sf6 Circuit Beaker uses sulphur hexaflouride ( SF6 ) gas as an arc quenching medium. The sf6 gas has a strong tendency to absorb free electrons because it is an electro negative gas in nature . The contacts of the breaker are opened in a high pressure flow of sf6 gas and an arc is struck between them. The conducting free electrons in the arc are rapidly captured by the gas to form relatively immobile negative ions. This loss of conducting electrons in the arc quickly builds up enough insulation strength to extinguish the arc. The sf6 circuit breakers are very effective for high power and high voltage service.

Construction :

As figure shows below the parts of a typical sf6 circuit breaker. It consists of fixed and moving contacts enclosed in a chamber called arc interruption chamber containing sf6 gas. This chamber is connected to sf6 gas reservoir. When the contacts of breaker are opened the valve mechanism permits a high pressure sf6 gas from the reservoir to flow towards the arc interruption chamber. The fixed contact is a hollow cylindrical current carrying contact fitted with an arc horn. The moving contact is also a hollow cylinder with rectangular holes in the sides to permit the sf6 gas to let out through these holes after flowing along and across the arc. The tips of fixed contact, moving contact and arcing horn are coated with copper-tungsten arc resistant material. Since sf6 gas is costly, its reconditioned and reclaimed by a suitable auxiliary system after each operation of the breaker.

sf6 Circuit Breaker



sf6 Circuit Breaker Double Axial Flow



sf6 Circuit Breaker Puffer Type

Working :

In the closed position of the breaker the contacts remained surrounded by sf6 gas at a pressure of about 2.8 kg/cm2. When the breaker operates the moving contact is pulled apart and an arc is struck between the contacts. The movement of the moving contact is synchronized with the opening of a valve which permits sf6 gas at 14 kg/cm2 pressure from the reservoir to the arc interruption chamber. The high pressure flow of sf6 rapidly absorbs the free electrons in the arc path to form immobile negative ions which are ineffective as charge a carriers. The result is that the medium between the contacts quickly builds up high dielectric strength and causes the extinction of the arc. After the breaker operation the valve is closed by the action of a set of springs.

Advantages over oil and air circuit breakers :

  • Gives noiseless operation due to its closed gas circuit.
  •  Due to superior arc quenching property of sf6 , such breakers have very short arcing time.
  • There is no risk of fire as sf6 is non inflammable.
  • Dielectric strength of sf6 gas is 2 to 3 times that of air, such breakers can interrupt much larger currents.
  • Low maintenance cost, light foundation requirements and minimum auxiliary equipment.
  • Closed gas enclosure keeps the interior dry so that there is no moisture problem.
  • sf6 breakers are totally enclosed and sealed from atmosphere, they are particularly suitable where explosion hazard exists.
  • There are no carbon deposits.

Disadvantages :

  • sf6 gas has to be reconditioned after every operation of the breaker, additional equipment is required for this purpose.
  • sf6 breakers are costly due to high cost of sf6 gas.

Applications :

sf6 Circuit Breaker have been used for voltages 115kV to 230 kV, power ratings 10 MVA to 20 MVA and interrupting time less than 3 cycles.


  1. #1 by Winfred Q. Blair on February 7, 2013 - 6:36 am

    The procedures for handling nonfaulted SF6 are well covered in manufacturer’s instruction books. These procedures normally consist of removing the SF6 from the circuit breaker, filtering and storing it in a gas cart as a liquid, and transferring it back to the circuit breaker after the circuit breaker maintenance has been performed. No special dress or precautions are required when handling nonfaulted SF6.
    Winfred Q. Blair recently posted..No last blog posts to return.My Profile

(will not be published)

CommentLuv badge